Linux version 2.6.31.5a (grant@black) (gcc version 4.3.3 (GCC) ) #6 SMP PREEMPT Thu Oct 29 08:19:25 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003eff0000 (usable)
 BIOS-e820: 000000003eff0000 - 000000003eff3000 (ACPI NVS)
 BIOS-e820: 000000003eff3000 - 000000003f000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x3eff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C9FFF write-protect
  CA000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03F000000 mask FFF000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000037f8f000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037c00000 page 2M
 0037c00000 - 0037f8f000 page 4k
kernel direct mapping tables up to 37f8f000 @ 7000-c000
ACPI: RSDP 000f6b40 00014 (v00 GBT   )
ACPI: RSDT 3eff3000 0002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
ACPI: FACP 3eff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
ACPI: DSDT 3eff30c0 040ED (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 3eff0000 00040
ACPI: APIC 3eff71c0 00068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
  mapped low ram: 0 - 37f8f000
  low ram: 0 - 37f8f000
  node 0 low ram: 00000000 - 37f8f000
  node 0 bootmap 00008000 - 0000eff4
(8 early reservations) ==> bootmem [0000000000 - 0037f8f000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 00015434c4]    TEXT DATA BSS ==> [0001000000 - 00015434c4]
  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #5 [0001544000 - 000154a08e]              BRK ==> [0001544000 - 000154a08e]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f50b0] f50b0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00037f8f
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00037f8f
On node 0 totalpages: 229166
free_area_init_node: node 0, pgdat c1484d80, node_mem_map c154b000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223407 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfc00000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1c4f000, static data 23196 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227374
Kernel command line: auto BOOT_IMAGE=2.6.31.5a ro root=303 vt.default_utf8=0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 903004k/917052k available (3348k kernel code, 13508k reserved, 1292k data, 308k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
    vmalloc : 0xf878f000 - 0xfff8f000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7f8f000   ( 895 MB)
      .init : 0xc1489000 - 0xc14d6000   ( 308 kB)
      .data : 0xc13450f5 - 0xc1488104   (1292 kB)
      .text : 0xc1000000 - 0xc13450f5   (3348 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:320
Fast TSC calibration using PIT
Detected 2411.562 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4823.12 BogoMIPS (lpj=2411562)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4822.30 BogoMIPS (lpj=2411154)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9645.43 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xfb000000-0xfb07ffff]
pci 0000:00:02.0: reg 18 io port: [0xc000-0xc007]
pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb080000-0xfb0803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c io port: [0xd000-0xd003]
pci 0000:00:1f.2: reg 20 io port: [0xd400-0xd40f]
pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f]
pci 0000:00:1f.5: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:1f.5: reg 14 io port: [0xe000-0xe03f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xfb081000-0xfb0811ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfb082000-0xfb0820ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:02.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:01:04.0: reg 10 io port: [0xa000-0xa0ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xfa005000-0xfa0050ff]
pci 0000:01:04.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:01:04.0: supports D1 D2
pci 0000:01:04.0: PME# supported from D1 D2 D3hot
pci 0000:01:04.0: PME# disabled
pci 0000:01:05.0: reg 10 32bit mmio: [0xfa004000-0xfa0047ff]
pci 0000:01:05.0: reg 14 32bit mmio: [0xfa000000-0xfa003fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:01:08.0: reg 10 32bit mmio: [0xfa006000-0xfa006fff]
pci 0000:01:08.0: reg 14 io port: [0xa400-0xa43f]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xcc000-0xd3fff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x3eff0000-0x3effffff could not be reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x3efeffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:00: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:00: iomem range 0xfff00000-0xffffffff has been reserved
system 00:00: iomem range 0xe0000-0xeffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x29f has been reserved
system 00:03: ioport range 0x800-0x805 has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xa000-0xafff
pci 0000:00:1e.0:   MEM window: 0xf8000000-0xfaffffff
pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x400fffff
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 1763
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x043a
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.3: Performing full reset
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xf0000000, mapped to 0xf8800000, using 937k, total 16192k
vesafb: mode is 800x600x8, linelength=800, pages=35
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
hda: ST3250823A, ATA DISK drive
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
hdb: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
Probing IDE interface ide1...
hdc: ST3250624A, ATA DISK drive
hdd: GCR-8521B, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/100 mode selected
hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdd: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hda: max request size: 512KiB
hda: Host Protected Area detected.
	current capacity is 488395055 sectors (250058 MB)
	native  capacity is 488397168 sectors (250059 MB)
hda: 488395055 sectors (250058 MB) w/8192KiB Cache, CHS=30401/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
hdc: max request size: 512KiB
hdc: 488397168 sectors (250059 MB) w/16384KiB Cache, CHS=30401/255/63
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 >
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:01:04.0: no PCI Express capability
eth0: RTL8110s at 0xf87b4000, 00:e0:4c:69:17:c1, XID 04000000 IRQ 18
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb080000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5a ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b000
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5a uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5a uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5a uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
usb usb5: default language 0x0409
usb usb5: udev 1, busnum 5, minor = 512
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5a uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Linux video capture interface: v2.00
it87: Found IT8712F chip at 0x290, revision 5
ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 3: status 0501 change 0001
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 8 chg 0008 evt 0000
hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 3 low speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
intel8x0_measure_ac97_clock: measured 51697 usecs (2491 samples)
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel ICH5 with ALC655 at irq 17
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
REISERFS (device hda3): found reiserfs format "3.6" with standard journal
REISERFS (device hda3): using ordered data mode
REISERFS (device hda3): journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device hda3): checking transaction log (hda3)
REISERFS (device hda3): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 3:3.
Freeing unused kernel memory: 308k freed
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: skipped 1 descriptor after interface
usb 3-1: default language 0x0409
usb 3-1: udev 2, busnum 3, minor = 257
usb 3-1: New USB device found, idVendor=045e, idProduct=0039
usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 3-1: Manufacturer: Microsoft
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1/input0
drivers/usb/core/inode.c: creating file '002'
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
usb usb2: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb 3-1: uevent
usb 3-1:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
ACPI: Sleep Button [SLPB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
firewire_ohci 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usb 3-1:1.0: uevent
usb 3-1: uevent
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usb 3-1:1.0: uevent
usb 3-1: uevent
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
cx8800 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0
cx88[0]: TV tuner type 44, Radio tuner type -1
firewire_core: created device fw0: GUID 000d610a0001bf27, S400
All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (cx88[0])
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
tuner-simple 1-0060: creating new instance
tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/input/input5
cx88[0]/0: found at 0000:01:02.0, rev: 5, irq: 22, latency: 32, mmio: 0xf8000000
IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
Adding 1028120k swap on /dev/hda5.  Priority:-1 extents:1 across:1028120k 
Adding 1028120k swap on /dev/hdc5.  Priority:-2 extents:1 across:1028120k 
REISERFS (device hdc3): found reiserfs format "3.6" with standard journal
REISERFS (device hdc3): using ordered data mode
REISERFS (device hdc3): journal params: device hdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device hdc3): checking transaction log (hdc3)
REISERFS (device hdc3): Using r5 hash to sort names
REISERFS (device hdc9): found reiserfs format "3.6" with standard journal
REISERFS (device hdc9): using ordered data mode
REISERFS (device hdc9): journal params: device hdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device hdc9): checking transaction log (hdc9)
REISERFS (device hdc9): Using r5 hash to sort names
r8169: eth0: link up
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb 3-1: uevent
usb 3-1:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us